Introduction to Watercolor Painting Techniques For Beginners

Watercolor painting is a very exciting medium. It’s easy to get started. All you really need is some paint, a few brushes, some water and paper and you are good to go. It is one of the most convenient painting mediums in existence to day. It is no wonder why it is such a popular option for beginners. Of course, you are going to need some advice and direction in order to get started, so I put together this post that covers some of the more basic watercolor techniques.

I have also included several excellent videos that demonstration watercolor painting techniques below.  Enjoy!

Basic Watercolor Techniques

Flat Wash Technique - The flat wash painting method is a common one. This technique is usually used when large areas of  your support need to be covered. It is important to  lay out the watercolor wash evenly and uniformly. First, you dampen the area of your paper where you will be applying the wash. Be sure  to have an adequate amount of water and pigment available before your begin. If you should have to stop for any reason, it will be rather difficult to match your layers. It is better to have more than less available. The angle at which you apply the watercolor wash is important. If the angle is too steep your wash will run down the paper. If the angle is too level, then there  won’t have enough movement. Use a large brush for this technique and start your first stroke at the top of the paper. Continue applying the watercolor wash going down the paper, but alternate sides as you move down.

Glazing - Glazing in watercolor is when you apply a thin transparent color over a completed dry layer of color. This technique creates unique and  interesting blends of new color. You will need to use a non-staining, transparent color for this watercolor technique. You will need to  use a soft brush and try not too apply that much pressure.

Wet In Wet - Wet in wet is simply applying a wet wash over a wet surface. You start by evenly wetting the paper with a brush or spray bottle. Have a sponge handy to absorb any excess water. You want your paper to be evenly saturated. Then apply your watercolor.

Dry Brush - With the dry brush technique, you begin with a dry piece of paper. Then pick up some dry pigment with just a touch of water and apply to your paper.

The dry brush method is only recommended when  you want to draw focus or create texture in your painting. It’s always a good idea to use different brush techniques in a single painting. This results in a more interesting painting.

Lifting Off - Artists use this technique when they want to remove watercolor from a certain area of the panting. It is usually done by first wetting the area that needs to be removed with a clean sponge and then absorb the color with a tissue. If you find that the color does not come off right away, then let the water soak in a bit longer and try again. If you still are unable to remove the color, dampen a bristle brush and gently scrub the area. Use extreme care when utilizing this method as it is possible to damage your paper....